Gerber 6' Monster Steel and Recycled Plastic Picnic Table

The Monster picnic table has all the standard Gerber picnic table features.  If you want the ultimate longevity and the greatest protection against vandalism and maintenance, the "Monster" is for you.  The Gerber 16S Shelter Table available in longer lengths for use in a shelter building or wherever an extra long table is desired.

Features:

• One-piece welded end frame
• Slides easily for mowing
• Won't tip when just one side is being used
• Center channel for a flatter, stronger top
• Walk-in design
• Rust resistant paint or hot dipped galvanized finish
• Stands tough against severe vandalism!
• No pipe sticking out in back of seat
• Low Maintenance
• Long Lasting
• Dimensions: 61" seat to seat , top height 27", seat height 17"
• Framework: 2 3/8" O.D. Schedule 40 pipe - Galvanized or Painted
• Seat and top supports: 3 x 3  x 3/16" hot roll angle iron
• Hardware: self-tapping galvanized lag screws are standard

DESIGN FEATURES: The Gerber Picnic Tables have the convenient "walk-in" design with nothing to step over, yet seats are attached so there's no tipping. They slide easily for mowing. The legs do not stick out behind the seats for people to trip over.

CONSTRUCTION: We don't send you a "pile of parts." Instead, we send a one-piece welded end frame. With some other tables you bolt the end frame together. The Gerber picnic table frame is welded together, solid, sturdy and built to last.

MATERIALS: Gerber picnic table frames are made out of the finest materials, not seconds, rejects or "thin wall" - but "prime grade" hot rolled steel. Brown or green are standard paint finish colors. Other colors are available (call 1 888 814-7531)

GALVANIZING: Galvanizing is also available for those that want a rust-free, maintenance-free framework. All galvanizing is done after fabrication for maximum protection. The hot-dip galvanizing is a tougher, thicker finish protecting both the inside and outside of the framework (recommended under severe rusting conditions).

"CENTER CHANNEL" Most other picnic tables don't have it! Gerber picnic tables have a unique center channel which ties in the three-board top to resist warpage, resulting in a flatter, stronger tabletop. The braces from the end frames attach to the center channel for added strength. Models without channel have smaller braces attached to the lumber like other tables.
FASTENERS: Self-tapping lag screws are standard, carriage bolts are optional. All fasteners are galvanized and included in the price of the frames.

PLANKING: The table top and seats are made from high density polyethylene material derived from post consumer bottle waste, resulting in a product that is more than 90% recycled.

WARRANTY: 3 year limited warranty on all parts against failure due to corrosion / natural deterioration or manufacturing defects. This warranty does not include any cosmetic issues or wear and tear from normal use.

Gerber Manufacturing specializes in picnic tables - commercial grade steel frame picnic tables, park benches, and grills. Gerber began in 1969 with the purchase of a picnic table company that had been producing picnic tables for fifteen years. So, over 50 years of experience goes into the product today. With this much experience specializing in a few products, Gerber Manufacturing has gained the wide acceptance in the leisure industry for quality, price and service. "Built to Last" is more that a slogan - It's a promise.